A model to predict S-N curves for surface and subsurface crack
initiations in different environmental medias. International Journal
of Fatigue, 2015 (71) 35-44.
Investigation on constraint effect of a reactor pressure
vessel subjected to pressurized thermal shocks. ASME Journal of Pressure
Vessel Technology, 2015 (137) (011204-1)-(011204-7).
Investigation of constraint and warm prestressing effects
with a micromechanics model. Engineering Fracture Mechanics, 2015.
Probabilistic pressurized thermal shocks analysis
for a reactor pressure vessel. ASME Journal of Pressure Vessel
Technology, 2015.
Calibration of Beremin model with the Master Curve.
Engineering Fracture Mechanics, 2015.
Deterministic and probabilistic analysis of a reactor
pressure vessel subjected to pressurized thermal shocks.
Nuclear Engineering and Design, 2014 (273) 381-395.
Probabilistic PTS analysis of a reactor pressure
vessel by considering realistic crack distributions.
Nuclear Engineering and Design, 2014 (270) 312-324.
In-plane and out-of-plane constraint effects under
pressurized thermal shocks. International Journal of
Solids and Structures, 2014 (51) 1311-1321.
Integrity analysis of reactor pressure vessels
subjected to pressurized thermal shocks by XFEM.
Nuclear Engineering and Design, 2014 (275) 336-43.
XFEM integrity analysis of quasi laminar flaws
in a reactor pressure vessel subjected to pressurized
thermal shocks. Nuclear Engineering and Design, 2014 (280) 464-72.
Procedures, methods and computer codes for probabilistic assessment
of reactor pressure vessels subjected to pressurized thermal shocks.
Nuclear Engineering and Design, 2013 (258) 35-50.
Integrity analysis of a reactor pressure vessel subjected to pressurized
thermal shocks by considering constraint effect. Engineering
Fracture Mechanics, 2013 (112-113) 14-25.
Markus Niffenegger, Wenxing Zhou, Shuxin Li. Effect of correlated
input parameters on the failure probability of pipelines with corrosion
defects by using FITNET FFS procedure. International Journal of Pressure
Vessel and Piping, 2013 (105-106) 19-27.
Probabilistic leak-before-break analysis with correlated input
parameters. Nuclear Engineering and Design, 2013 (254) 266-71.
Fatigue strength and crack initiation mechanism of Very-High-Cycle
fatigue for low alloy steels. Metallurgical and Materials
Transactions A, 2012 (8) 2753-62.
Experimental and theoretical investigation of environmental
media on very-high-cycle fatigue behavior for a structural steel.
Acta Materialia, 2011 (59) 1321-27.
Probabilistic analysis of pipeline with corrosion defects
by using FITNET FFS procedure. Corrosion Science, 2011 (53) 855-61.
Probabilistic fracture assessment of piping systems based
on FITNET FFS procedure. Nuclear Engineering and Design, 2011 (241) 714-22.
Effect of aqueous environment on high cycle and
Very-High-Cycle fatigue behavior for a structural steel. Key
Engineering Materials, 2011 (462-463) 355-60.
Investigation of high cycle and very-high-cycle fatigue behaviors
for a structural steel with smooth and notched specimens. Engineering
Failure Analysis, 2010 (17) 1517-25.
Effects of environmental media on high cycle and Very-High-Cycle
fatigue behaviors of structural steel 40 Cr. Acta Metallurgica Sinica,
2009 (45) 1356-63.
Essential characteristics and influential factors for Very-High-Cycle
fatigue behavior of metallic materials. Acta Metallurgica Sinica, 2009 (45) 769-80.
Measurement of thin film piezoelectric constants using X-ray
diffraction technique, Physica Scripta, T129(2008)353-357
Measurement on elastic constants of thin films by Synchrotron X-ray
diffraction, Advances in of Synchrotron Radiation,
DOI: 10.1142/S1793617908000288 V.01(2008)179.
Location of initial debonding and stress singularity at interface
end,Advanced Materials Research, 2008, 33-37: 315-320.
Predictions of stiffness and strength of Nylon 6/MMT nanocomposites
with an improved staggered model,Composites B,2008, 39: 1062-68.
Distribution in orientation axis of thin films grown by pulsed
laser deposition, Thin Solid Films, DOI: 10.1016/j.tsf.2007.04.150 (2007)
Measurement of X-ray stress elastic constants of thin films,
J of Smart Structure Materials, 16(2007)487-492
Highly (100) oriented PZT/LNO films grown on amorphous substrates
by pulsed laser deposition, J. Applied Physics A, DOI: 10.1007/s00339-007-3968-y,
A88(2007)365-370
Residual stresses of PZT thin films measured by synchrotron
radiation, J. of Alloy and Compounds, DOI: 10.1016/j.jallcom.2006.02.109 (2007)
Stiffness prediction of nylon 6/caly nanocomposites with a
staggered model, Solid State Phenomena, 2007, 121-123: 1443-1445.
Effect of stress singularity on stress distribution and initial
debonding of interface end, Key Engineering Materials, 2007, 334-335: 641-644.
Measurement of elastic constants of crystalline solid films by XRD
coupled with four-point bending technique, Surface and coating Technology, 200 (2006)4006-4010
Youshi Hong. Fractography and crack initiation of Very-High-Cycle
fatigue for a high carbon low alloy steel. Key Engineering Materials, 2006 (324-325) 1113-16.
Specimen design for IFSS measurement in fiber pullout test, Key
Engineering Materials, 2006, 312: 149-154.( 1013-9826)
The reliability of fragmentation test, Key Engineering Materials,
2006, 312: 155-160.
Re-evaluation of fragmentation test based on the stress singularity of
interface end, Composite Interfacs, 2006, 13(1): 67-88.( 0927-6440).
Numerical study of the single fibre push-out test: Part III. Singularity
of interface stresses, Composite Interfaces, 2003, 10(1): 17-40.
Interface theory and re-evaluation in interfacial strength test methods,
Composite interface, 2003, 10(6): 567-580
Micro-crack initiation at tip of a rigid line inhomogeneity in
piezoelectric materials, International Journal of Engineering Science, 2003, 41(2), 137 –147.
Exact solution of multi-layered piezoelectric diaphragm, IEEE
Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2003, 50(10): 1262-1271.
Bi-axial aligned LNO thin films grown on SiO2 surface by PLD,
submitted to J. Crystal Growth
Gap filler and brazing temperature on fracture and fatigue of
wide gap brazed joint, J. of Materials Science, 30(1995)2101-2107
Fracture and fatigue of wide gap brazed stainless steel, J. of
the Institute of Engineers (Singapore),34, No.6(1994)91-95
Wide gap brazing of stainless steel with nickel-based eutectic
filler metals, J of The Institute of Materials (East Asia), 2, No.2(1993)75-80
Comparison on strengthening methods for crankshaft, J of Automobile
Technology & Materials, No4 (1992) 1-4
Improvements on stress relaxation resistance of low carbon
martensite, J of Light Automobile Technology, No3(1992) 39-42
BEM for Arbitrary Elastic Thin Shells, Acta Mechanica Sinica
(English Edition), 1992, No.4, pp355-362
Exploring on Deformation Analysis of Convex Continuous Solids by
Image Reconstruction Method, J. of Mechanical Strength (in Chinese) 1992, No.2, pp1-6
Research on Establishing BEM of Various Plates with Kelvin's
Fundamental Solution, J. of Solid Mechanics Sinica,(English Edition),1992, vol.5, No.3, pp-311-321
Integral Equations Derivation of BEM for Plates and Shells, J of
Southeast University, vol. 22, 1992, No. 6, pp 58~64
Fatigue performance study for medium carbon steels, J. of Light
Automobile Technology, No.2,(1989) 34‑42
Error analysis for x‑ray stress measurement at the notch, J. of
Physical Testing (In Chinese) 25, No3(1989)30‑34
Measurement of notch residual stress fields produced by shot
peening, J. of Light Automobile Technology, No.5(1987)77‑81
Dynamic Stress Concentration Factors of the Fibres in Interlamented
Hybrid Composites, J. of Xi'an Jiaotong University, 1983, Vol.17, No.6, pp85‑90